OzFDM PC - ABS Sparkling 3D Printing Filament 1.75mm 1KG - OzFDM

1.75 mm PC-ABS Sparkling Filament - 1 KG

Black
$34.95 AUD
Skip to product information
OzFDM PC - ABS Sparkling 3D Printing Filament 1.75mm 1KG - OzFDM
  • OzFDM PC - ABS Sparkling 3D Printing Filament 1.75mm 1KG - OzFDM
  • OzFDM PC - ABS Sparkling 3D Printing Filament 1.75mm 1KG - OzFDM
  • OzFDM PC - ABS Sparkling 3D Printing Filament 1.75mm 1KG - OzFDM
  • OzFDM PC - ABS Sparkling 3D Printing Filament 1.75mm 1KG - OzFDM
  • OzFDM PC - ABS Sparkling 3D Printing Filament 1.75mm 1KG - OzFDM
  • OzFDM PC - ABS Sparkling 3D Printing Filament 1.75mm 1KG - OzFDM
  • OzFDM PC - ABS Sparkling 3D Printing Filament 1.75mm 1KG - OzFDM
  • OzFDM PC - ABS Sparkling 3D Printing Filament 1.75mm 1KG - OzFDM
1.75 mm PC-ABS Sparkling Filament - 1 KG

1.75 mm PC-ABS Sparkling Filament - 1 KG

$34.95 AUD
Taxes included. Shipping calculated at checkout.
ColourBlack
In stock

Experience superior heat resistance with the Oz FDM PC-ABS 1.75mm ± 0.05 1KG filament. Featuring a heat deflection temperature of 123° Celsius, this PolyCarbonate-ABS Filament is an ideal choice for producing 3D-printed components that require exceptional heat resistance.
Technical Data Sheet PDF

Technical Specifications

Product Specifications
Filament weight
1 kg
Filament diameter
1.75 mm
Dimensional tolerance
±0.05mm
Spool weight (empty)
150 g
Spool weight (new)
1.15 kg
Spool diameter outer
200 mm
Spool diameter inner (hub)
52 mm
Spool width
65 mm
Package weight
1.3 kg
Package dimensions
210mm x 220mm x 75mm
Drying recommendation
80°C for a minimum of 12 hours using a filament dryer / food dehydrator.
Storage recommendation
Airtight bag or container with desiccant in a cool, dark and dry area to prevent moisture absorption. For optimal long term storage we recommend drying the filament prior to sealing the filament spool in a vacuum bag with desiccant.

After printing we recommend annealing the finished model at 100°C for 1~3 hours to increase strength of the model.

Print Parameters
Nozzle temperature
250°C - 280°C (265°C recommended)
Bed temperature
90°C - 110°C (100°C recommended)
Printing speed
40mm/s - 60mm/s (50mm/s recommended)
Support material
HIPS
Mechanical Properties
Tensile strengthISO 527
43.5~45.5 MPa
Elongation at breakISO 527
24~26 %
Tensile modulusISO 527
800~950 MPa
Flexural strengthISO 178
71.5~74.5 MPa
Impact strengthISO 180
43.5~44.5 kJ/m²
Physical Properties
DensityISO 1183
1.14~1.15 g/cm³
Melt flow rate (260°C/5 kg)ISO 1133
19~22 g/10min
Moisture absorption (23°C/24h)ISO 62
<0.8 %
Thermodynamic Properties
HDT @ 0.455 MPa (66 psi)ISO 75
112 °C
Continuous Use TemperatureUL 746B (RTI)
110 °C
Colour Hex Codes
  • Black #000000
  • Beige #EAD8AB
  • Red #F61F1F
  • Green #05AA3D
  • Blue #005BD3
  • Lime #BFFF00
  • Orange #FF8A00
  • Purple #A54DCF

Approximate values taken from the colour swatches. Screen colours are a guide only.

  • Really quite cool filament very strong parts even at 15 percent infill
  • Works perfectly. Prints very easily in a heated chamber
Parts (positive)Filament (positive)Prints (positive)Infill (positive)Cleaner (neutral)
  • 5 stars: 10 (91%)
  • 4 stars: 1 (9%)
  • 3 stars: 0 (0%)
  • 2 stars: 0 (0%)
  • 1 star: 0 (0%)
M
Matt

Really quite cool filment very strong parts even at 15 percent infill

A
Arnold

Works perfectly. Prints very easily in a heated chamber, just remember to run some cleaner filament after use if you are switching to a different filament (plain ASA, PLA, etc)

A
Arnold

Works perfectly. Prints very easily in a heated chamber, just remember to run some cleaner filament after use if you are switching to a different filament (plain ASA, PLA, etc)

A
Arnold

Works perfectly. Prints very easily in a heated chamber, just remember to run some cleaner filament after use if you are switching to a different filament (plain ASA, PLA, etc)

A
Arnold

Works perfectly. Prints very easily in a heated chamber, just remember to run some cleaner filament after use if you are switching to a different filament (plain ASA, PLA, etc)

A
Arnold

Works perfectly. Prints very easily in a heated chamber, just remember to run some cleaner filament after use if you are switching to a different filament (plain ASA, PLA, etc)

A
Arnold

Works perfectly. Prints very easily in a heated chamber, just remember to run some cleaner filament after use if you are switching to a different filament (plain ASA, PLA, etc)

A
Arnold

Works perfectly. Prints very easily in a heated chamber, just remember to run some cleaner filament after use if you are switching to a different filament (plain ASA, PLA, etc)

A
Arnold

Works perfectly. Prints very easily in a heated chamber, just remember to run some cleaner filament after use if you are switching to a different filament (plain ASA, PLA, etc)

A
Arnold

Works perfectly. Prints very easily in a heated chamber, just remember to run some cleaner filament after use if you are switching to a different filament (plain ASA, PLA, etc)

A
Arnold

Works perfectly. Prints very easily in a heated chamber, just remember to run some cleaner filament after use if you are switching to a different filament (plain ASA, PLA, etc)

You may also like