OzFDM PLA+ Solid Colours 3D Printing Filament 1.75mm 1KG
Tax included. Shipping calculated at checkout
Product Features
- Easy to Print & Beginner Friendly
- Smooth Surface Finish
- Biodegradable*
- Diameter: 1.75mm +/- 0.03mm
Choose options
OzFDM PLA+ 3D printing filament is specially produced with modified, toughened PLA for maximum strength and usability with most FDM printers. This filament offers exceptional bed and layer adhesion, no warping/cracking, and remarkable dimensional stability; all within strict QA standards. Users will enjoy an easy, consistent, and reliable printing experience with 100% biodegradable, FDA-approved safety and quality assured PLA+.
Product specifications:
| Filament weight | 1KG |
| Filament diameter | 1.75mm |
| Dimensional tolerance | ±0.03mm |
| Spool weight (empty) | 150g |
| Spool weight (new) | 1.15KG |
| Spool diameter outer | 200mm |
| Spool diameter inner (hub) | 52mm |
| Spool width | 65mm |
| Package weight | 1.3KG |
| Package dimensions | 210mm x 210mm x 75mm |
Print parameters:
| Nozzle temperature | 190°C - 220°C |
| Bed temperature | 25°C - 60°C |
| Printing speed | 60mm/s - 90mm/s |
| Support material | PVA , PETG (as support interface) |
Physical Properties:
| Density | ISO 1183 | 1.25~1.26 g/cm3 |
| MFR(250°C/2.16Kg) | ISO 1133 | 3~6 g/10min |
| Moisture Absorbtion(23°C/24h) | ISO 62 | <0.3 % |
Mechanical Properties:
| Tensile Strength | ISO 527 | 45.5~49 Mpa |
| Elongation at Break | ISO 527 | 14.5~16.5 % |
| Flexural Modulus | ISO 527 | 950~1050 Mpa |
| Flexural Strength | ISO 178 | 73~76 Mpa |
| Impact Strength | ISO 180 | 9.5~10.5 KJ/m² |
Thermodynamic Properties:
| HDT @ 0.455 Mpa(66 psi) | ISO 75 | 53 °C |
| Continuous Use Temperature | IEC 60216 | 50 °C |
Colour Hex Code Table:
| Colour | Hex Code** | Display Colour** |
| Black | #1B1B18 | |
| White | #DAE0E0 | |
| Cool White | #E8EAEA | |
| Natural | #E4E6E7 | |
| Grey | #485E67 | |
| Red | #BD4442 | |
| Green | #649054 | |
| Blue | #0F2A83 | |
| Light Blue | #007CB2 | |
| Purple | #462276 | |
| Rose | #CA4590 | |
| Pink | #E397BC | |
| Orange | #E9882D | |
| Yellow | #F0C65B | |
| Skin | #D6B38C | |
| Brown | #9C604F |
**measured using 'nix mini 3 colour sensor' on a finished print with recommended print settings.
Drying recommendation:
40°C - 45°C for 4-6 hours using a filament dryer / food dehydrator.
Storage recommendation:
Airtight bag or container with desiccant in a cool, dark and dry area to prevent moisture absorption. For optimal long term storage we recommend drying the filament prior to sealing the filament spool in a vacuum bag with desiccant.
*Biodegradable under commercial composting conditions. Please do not throw into your compost bin at home.