OzFDM PA6-CF (Nylon) 3D Printing Filament 1.75mm 1KG
Tax included. Shipping calculated at checkout
Product Features
- Superior Strength and Stiffness
- Toughness & Vibration Resistance
- Exceptional Thermal Resistance (200°C)
- Diameter: 1.75mm +/- 0.05mm
Choose options
OzFDM PA6-CF is a superior quality carbon fibre reinforced Nylon6 filament with excellent heat resistance of up to 200°C. It is made from 85% Nylon and 15% carbon fibre and has been produced with LUVOCOM 3F PAHT CF. For best results, anneal for 3 hours between 80 - 100°C after printing.
Product specifications:
| Filament weight | 1KG |
| Filament diameter | 1.75mm |
| Dimensional tolerance | ±0.05mm |
| Spool weight (empty) | 150g |
| Spool weight (new) | 1.15KG |
| Spool diameter outer | 200mm |
| Spool diameter inner (hub) | 52mm |
| Spool width | 65mm |
| Package weight | 1.3KG |
| Package dimensions | 210mm x 210mm x 75mm |
Print parameters:
| Nozzle temperature | 270°C - 290°C (280°C recommended) |
| Bed temperature | 60°C - 90°C (80°C recommended) |
| Printing speed | 40mm/s - 60mm/s (50mm/s recommended) |
| Support material | PVA |
Physical Properties:
| Density | ISO 1183 | 1.24~1.26 g/cm3 |
| MFR(250°C/2.16Kg) | ISO 1133 | 3~6 g/10min |
| Moisture Absorbtion(23°C/24h) | ISO 62 | <1 % |
Mechanical Properties:
| Tensile Strength | ISO 527 | 60~65 Mpa |
| Elongation at Break | ISO 527 | 6~6.5 % |
| Flexural Modulus | ISO 527 | 4900~5000 Mpa |
| Flexural Strength | ISO 178 | N/A |
| Impact Strength | ISO 180 | 7.5~8 KJ/m² |
Thermodynamic Properties:
| HDT @ 0.455 Mpa(66 psi) | ISO 75 | 200 °C |
| Continuous Use Temperature | IEC 60216 | 150 °C |
| Use Temperature(200 hours) | 180 °C |
Electrical Characteristics:
| Insulation Resistance | IEC 60167 | ≤10² Ω |
| Surface Resistance | IEC 60093 | ≤10² Ω |
Drying recommendation:
80°C for a minimum of 12 hours using a filament dryer / food dehydrator.
Storage recommendation:
Airtight bag or container with desiccant in a cool, dark and dry area to prevent moisture absorption. For optimal long term storage we recommend drying the filament prior to sealing the filament spool in a vacuum bag with desiccant.