Natural Tones, Printed Fast
Earth tones do a lot of heavy lifting in 3D printing: tabletop terrain, buildings, rocks, tree trunks, animals and wood look decor all start with a good set of browns. This pack gives you four shades that blend from light to dark, in a PLA formulated for high speed printing.
Four Shades That Blend
Bone and Light Brown handle highlights, stone and sand, while Brown and Chocolate Brown give depth to wood, soil and shadows. Loaded together, they make natural looking multicolour prints.
Built for Fast Printers
High Speed PLA uses a modified, toughened PLA with optimised flow, so it extrudes evenly at speeds up to 350 mm/s with strong bed and layer adhesion.
AMS Ready
Suitable for Bambu Lab AMS and AMS Lite systems, so all four shades can sit in one unit for multicolour terrain and models.
Pack Details
Full Pack Contents
Every roll is picked from our regular stock, so you can top up anything from its own product page.
Recommended Print Settings
| Filament | Nozzle | Bed | Speed |
|---|---|---|---|
| High Speed PLA | 190°C to 220°C | 25°C to 60°C | 60 to 350 mm/s |
At the top of the speed range, raise the nozzle temperature towards 220°C so the filament keeps up with the flow.
Full specifications and drying recommendations are on each filament's product page.
Keeping Filament Dry
PLA slowly absorbs moisture from the air, which can lead to stringing and rough surfaces. Store open rolls in an airtight bag with desiccant. If a roll has been left out, dry it at 40°C to 45°C for 4 to 6 hours in a filament dryer before printing.
Frequently Asked Questions
Can I print High Speed PLA at normal speeds?
Yes. It prints well from 60 mm/s, so it suits older and slower printers as well as fast CoreXY machines.
Can I choose different colours?
The pack comes in the colours listed. For other colours, add extra rolls from our filament range. Once you have three or more individual rolls in your cart, our filament volume pricing applies to those rolls.
How should I store rolls I am not using yet?
Keep spare rolls sealed in a vacuum seal bag with silica gel desiccant so they print as well as the day they arrived.