Login

Cart

Your cart is empty

Article: TPU on Bambu Lab X1 Carbon

PrevNext
TPU on Bambu Lab X1 Carbon - OzFDM
Bambu Lab X1 Carbon

TPU on Bambu Lab X1 Carbon

Recommended slicer settings for OzFDM TPU95A on the Bambu Lab X1 Carbon.

 

 Nozzle Temp

- °C

Range: °C
Bed Temp

- °C

Range: °C
Print Speed

-

mm/s · max ---
Layer Height

-

mm · max ---
Fan Speed

%

1st layer: - %
1st Layer Speed

-

mm/s
Retraction

-mm

@ - mm/s
Nozzle Type

-

Standard


 

  Retraction Note

  • Minimise retraction for TPU – it causes tangles and clogs. Disable if stringing is acceptable. 


Full Settings Reference

 Settings

Recommended

Range
Nozzle Temperature



Bed Temperature



Print Speed



First Layer Speed



Layer Height



Fan Speed (Normal)



Fan Speed (1st Layer)



Retraction Distance



Retraction Speed



Nozzle Type



Dry Filament



Enclosure



 

 

 Printing Notes






 

 

 Troubleshooting




 

OzFDM TPU95A Filament

  • -

Share

Leave a comment

This site is protected by hCaptcha and the hCaptcha Privacy Policy and Terms of Service apply.

All comments are moderated before being published.

Read more

ABS on Creality K1 - OzFDM
Creality K1

ABS on Creality K1

Get consistent results with recommended slicer settings for OzFDM ABS on the Creality K1. This guide covers temperature control, airflow, and retraction to help minimise warping and achieve strong,...

Read more
PETG on Bambu Lab A1 Mini - OzFDM
Bambu Lab A1 Mini

PETG on Bambu Lab A1 Mini

Get strong, low stringing results with OzFDM PETG Basic on the Bambu Lab A1 Mini. This guide covers balanced temperature, controlled retraction, and cooling settings for clean, consistent prints.

Read more