Are you looking to add a touch of elegance and sophistication to your 3D prints? Look no further than OzFDM PLA Marble filament. With its unique marble-like appearance, this filament can bring a whole new level of beauty to your creations. But to achieve the best results, it's important to know the recommended print settings and some handy tips. In this blog post, we'll guide you through everything you need to know to make the most of your OzFDM PLA Marble filament.
What are the recommended print settings for OzFDM PLA Marble filament?
Before you start printing with OzFDM PLA Marble filament, it's crucial to ensure that your printer is properly calibrated. We also recommend drying the Filament prior to use, even brand new PLA Filaments. This will help you achieve the best results and avoid any potential issues. Here are the recommended print settings for OzFDM PLA Marble filament:
- Printing Temperature: 190-220°C
- Bed Temperature: 30-60°C
- Print Speed: 30-100 mm/s
- Layer Height: 0.1-0.3 mm
- Drying Temperature/Time: 45°C / 6 Hours
These settings may vary depending on your specific printer, so it's always a good idea to consult your printer's manual or the manufacturer's website for any specific recommendations.
Our filament test Model
For our Filament test we used the 'Roman Cup Planter' STL from STLFlix.com .
Using our BambuLab X1C we used the following settings:
- Nozzle: 0.4mm
- Layer height: 0.12mm
- First layer speed: 50mm/s
- Wall and infill speeds: 100mm/s
