LCD1602 16x2 Blue Character Display with I2C Adapter - OzFDM

LCD1602 16x2 Blue Character Display with I2C Adapter

$29.59 AUD
Skip to product information
LCD1602 16x2 Blue Character Display with I2C Adapter - OzFDM

LCD1602 16x2 Blue Character Display with I2C Adapter

$29.59 AUD
Taxes included. Shipping calculated at checkout.
4 left

Product Features

  • 16 x 2 character LCD, white text on blue
  • I2C adapter fitted, only 4 wires to connect
  • Adjustable contrast and switchable backlight
  • HD44780 compatible
  • Sold individually

The classic project display:

The 1602 LCD shows two lines of sixteen characters and is supported by almost every Arduino tutorial. This version comes with a PCF8574 I2C backpack already fitted, so it needs only power, ground, SDA and SCL instead of six or more data lines.

Getting started:

Use the LiquidCrystal_I2C library on Arduino or ESP32. The default I2C address is usually 0x27 (0x3F on some adapters); an I2C scanner sketch will confirm it. Turn the blue trimmer on the back to set the contrast if the characters are faint or show as solid blocks.

Applications:

Menus and status screens, temperature and humidity readouts, filament dryer and enclosure controllers, clocks, learning projects.

Specifications:

Display 16 characters x 2 lines, 5 x 8 dot characters
Colours White characters, blue backlight
Controller HD44780 compatible
Interface I2C via PCF8574 backpack, address 0x27 or 0x3F
Pins 4 pin header: GND, VCC, SDA, SCL
Supply voltage 5V DC
Module size Approx. 80 x 36mm
Viewing area Approx. 64 x 14mm

The display runs on 5V. On 3.3V boards such as the ESP32 it usually works with 3.3V I2C signals, but power the module from 5V.

You may also like

Loading product recommendations