OzFDM's PLA Chameleon Dual-Colour Filament
OzFDM’s PLA Chameleon Dual-Colour 1.75mm filament is a visually dynamic filament designed to create colour shifting prints with a smooth, high quality finish. Made from reliable PLA material, it combines easy printability with a dual-colour blend that produces a striking visual effect depending on print orientation and lighting. Ideal for decorative parts, display models, and creative projects, PLA Chameleon delivers consistent extrusion, strong layer adhesion, and a clean surface finish while offering a unique multi-tone appearance across each print.
OzFDM's PLA Chameleon Dual-Colour Shade Range
Colour in Motion
PLA Chameleon Dual-Colour filament is available in a selection of vibrant colour combinations designed to create a shifting, multi-tone effect as your print catches the light. Each variant blends two colours into a single strand, producing a smooth transition across surfaces and adding depth and visual interest to finished prints.
The final appearance will vary depending on print orientation, layer height, and lighting, making every print uniquely its own.
Smooth feeding and reliable performance in AMS systems
Designed for AMS Use
- PLA Chameleon Dual-Colour filament is fully compatible with AMS systems and feeds reliably thanks to its consistent diameter and PLA base material.
- It performs the same as standard PLA within multi-material setups, making it suitable for both single and multi-spool printing.
- Keep the filament dry and feed it smoothly through the system to achieve optimal results, as with all decorative filaments.
Performance Highlights
PLA Chameleon Dual-Colour Key Points
- Dual-colour chameleon effect with smooth colour transitions
- Easy to print PLA base material
- AMS compatible for seamless multi-spool use
- Excellent layer adhesion and surface finish
- Ideal for decorative prints and display models
- Reliable performance across a wide range of FDM printers
PLA Chameleon Dual-Colour Technical Specifications
Product Specifications
Each spool of OzFDM’s PLA Chameleon Dual-Colour filament is vacuum sealed with a moisture absorbing desiccant so it is ready to print when you open the box.
For additional details on packaging, storage, and shipping, see the information provided below.
Filament weight
1KG
Filament diameter
1.75mm
Dimensional tolerance
±0.03mm
Spool weight (empty)
150g
Spool weight (new)
1.15KG
Spool diameter outer
200mm
Spool diameter inner (hub)
52mm
Spool width
65mm
Package weight
1.3KG
Package dimensions
210mm x 220mm x 75mm
Drying recommendation:
40°C – 45°C for 4–6 hours using a filament dryer / food dehydrator.
Storage recommendation:
Airtight bag or container with desiccant in a cool, dark and dry area to prevent moisture absorption. For optimal long term storage we recommend drying the filament prior to sealing the filament spool in a vacuum bag with desiccant.
Print Parameters
For best results, follow the recommended print parameters provided below to achieve reliable, high-quality prints every time.
Nozzle temperature
190°C - 220°C
Bed temperature
25°C - 60°C
Printing speed
60mm/s - 90mm/s
Support material
PVA (as support interface)
Mechanical Properties
PLA Chameleon Dual-Colour is built on a standard PLA base, so strength is comparable to standard PLA and best suited to decorative prints and light functional parts.
For a deeper look at strength, durability, and tested material performance, refer to the mechanical property data outlined below.
Tensile Strength
ISO 527
45~49 MPa
Elongation at Break
ISO 527
13.5~15.5 %
Tensile Modulus
ISO 527
1000~1100 MPa
Flexural Strength
ISO 178
69~75 MPa
Impact Strength
ISO 180
4.5~5 kJ/m²
Physical Properties
PLA Chameleon Dual-Colour has a consistent PLA composition for smooth flow and accurate extrusion.
For a closer look at density, flow rate, and moisture resistance, see the physical property data outlined below.
Density
ISO 1183
1.25~1.26 g/cm³
MFR (190°C/2.16 kg)
ISO 1133
4~8 g/10min
Moisture Absorption (23°C/24h)
ISO 62
<0.3 %
Thermodynamic Properties
Like all PLA, PLA Chameleon Dual-Colour softens at relatively low temperatures, so keep printed parts away from hot cars and direct heat sources.
For detailed insights on heat deflection and continuous use ratings, refer to the thermal property data provided below.
HDT @ 0.455 MPa (66 psi)
ISO 75
53 °C
Continuous Use Temperature
IEC 60216
50 °C