Threaded Inserts (Knurled Brass Threaded Heat Insert) - OzFDM

M5 Heat Set Insert Pack (100 pcs)

$31.95 AUD $35.00 AUD
Skip to product information
Threaded Inserts (Knurled Brass Threaded Heat Insert) - OzFDM
  • Threaded Inserts (Knurled Brass Threaded Heat Insert) - OzFDM
  • Threaded Inserts (Knurled Brass Threaded Heat Insert) - OzFDM
  • Threaded Inserts (Knurled Brass Threaded Heat Insert) - OzFDM
M5 Heat Set Insert Pack (100 pcs)

M5 Heat Set Insert Pack (100 pcs)

$31.95 AUD $35.00 AUD
Taxes included. Shipping calculated at checkout.
In stock

One hundred M5 knurled brass heat set inserts, split evenly between short and long, for aluminium extrusion builds, structural joints and larger printed parts that carry real load.

  • 50 M5 Short: 6 mm long, for thinner walls and shallower bosses
  • 50 M5 Long: 9.5 mm long, for deeper holes and maximum thread engagement

Every piece is the same part we sell individually, bundled together for a cheaper price than buying each size on its own.

Strong M5 Threads for Bigger Builds

When a printed part mounts to aluminium extrusion, holds a motor or takes a real load, M5 is the thread size to reach for. This pack keeps plenty of both lengths on the bench, so you can design strong, reusable joints into your next frame, enclosure or jig.

M5 Short

At 6 mm long, the short insert suits thinner walls and shallower bosses where a long insert would break through.

M5 Long

At 9.5 mm long, the long insert gives more thread engagement and grip in thick sections and parts that see heavy or repeated loads.

Simple to Install

Set your soldering iron to the filament's printing temperature plus 10°C, rest the insert on a 6.2 mm hole and press it in straight and slowly. Let the part cool before tightening a screw into it.

Full Pack Contents
ItemQty
Brass heat set insert, M5 Short50
Brass heat set insert, M5 Long50

Every item is picked from our regular stock, so you can top up anything from its own product page.

Hole Sizes
InsertLengthInsert diameterHole diameter
M5 Short6 mm7 mm6.2 mm
M5 Long9.5 mm7 mm6.2 mm

Set your soldering iron to the filament's printing temperature plus 10°C and press the insert in straight and slowly.

Frequently Asked Questions

Which screws fit these inserts?

Any M5 machine screw. Our M5 Fastener Starter Kit has countersunk and button head screws in five lengths with nuts and washers.

Need smaller inserts?

The M3 Heat Set Insert Pack covers the most common printer size, and the Heat Set Insert Starter Kit has M2 to M5 in one box.

Can I buy more of one size?

Yes. Every size is available individually from our heat set insert listing, with bulk pricing on larger quantities.

You may also like