• Home
  • Contact
  • Rewards
Login

Cart

Your cart is empty

Article: PLA on Anycubic Kobra 2 Pro

PrevNext
PLA on Anycubic Kobra 2 Pro - OzFDM
Anycubic Kobra 2 Pro

PLA on Anycubic Kobra 2 Pro

Logan F.

Recommended slicer settings for OzFDM PLA Basic on the Anycubic Kobra 2 Pro.

 

 Nozzle Temp

- °C

Range: °C
Bed Temp

- °C

Range: °C
Print Speed

-

mm/s · max ---
Layer Height

-

mm · max ---
Fan Speed

%

1st layer: - %
1st Layer Speed

-

mm/s
Retraction

-mm

@ - mm/s
Nozzle Type

-

Standard


 

  Retraction Note

  • Start with Anycubic Slicer's preset. 1.5 mm retraction is a good starting point.


Full Settings Reference

 Settings

Recommended

Range
Nozzle Temperature



Bed Temperature



Print Speed



First Layer Speed



Layer Height



Fan Speed (Normal)



Fan Speed (1st Layer)



Retraction Distance



Retraction Speed



Nozzle Type



Dry Filament



Enclosure



 

 

 Printing Notes






 

 

 Troubleshooting




 

OzFDM PLA Basic Filament

  • -

Share

Leave a comment

This site is protected by hCaptcha and the hCaptcha Privacy Policy and Terms of Service apply.

All comments are moderated before being published.

Read more

ABS on Prusa MK4 - OzFDM
Prusa MK4

ABS on Prusa MK4

Recommended print settings for OzFDM ABS on the Prusa MK4. This profile provides a starting point for durable prints, with guidance on temperature, cooling, and enclosure use to improve reliability.

Read more
ABS on Creality K1 - OzFDM
Creality K1

ABS on Creality K1

Get consistent results with recommended slicer settings for OzFDM ABS on the Creality K1. This guide covers temperature control, airflow, and retraction to help minimise warping and achieve strong,...

Read more