• Home
  • Contact
  • Rewards
Login

Cart

Your cart is empty

Article: PLA Basic on Prusa MINI+

PrevNext
PLA Basic on Prusa MINI+ - OzFDM
Prusa MINI+

PLA Basic on Prusa MINI+

Recommended slicer settings for OzFDM PLA Basic on the Prusa MINI+

 

 Nozzle Temp

- °C

Range: °C
Bed Temp

- °C

Range: °C
Print Speed

-

mm/s · max ---
Layer Height

-

mm · max ---
Fan Speed

%

1st layer: - %
1st Layer Speed

-

mm/s
Retraction

-mm

@ - mm/s
Nozzle Type

-

Standard


 

  Retraction Note

  • Bowden extruder — retraction is much longer than direct drive (3–4 mm typical).


Full Settings Reference

 Settings

Recommended

Range
Nozzle Temperature



Bed Temperature



Print Speed



First Layer Speed



Layer Height



Fan Speed (Normal)



Fan Speed (1st Layer)



Retraction Distance



Retraction Speed



Nozzle Type



Dry Filament



Enclosure



 

 

 Printing Notes






 

 

 Troubleshooting




 

OzFDM PLA Basic Filament

  • -

Share

Leave a comment

This site is protected by hCaptcha and the hCaptcha Privacy Policy and Terms of Service apply.

All comments are moderated before being published.

Read more

PETG Basic on Creality K1 - OzFDM
Creality K1

PETG Basic on Creality K1

Dial in your prints with recommended slicer settings for OzFDM PETG Basic on the Creality K1. This guide covers temperature, speed, and retraction tuning to help reduce stringing and achieve clean,...

Read more
ASA on Bambu Lab X1 Carbon - OzFDM
Bambu Lab X1 Carbon

ASA on Bambu Lab X1 Carbon

Print durable, weather resistant parts with OzFDM ASA on the Bambu Lab X1 Carbon. With an enclosed build chamber and tuned retraction, achieve clean surface finishes, reduced warping, and consisten...

Read more